Precision Magnetic Sensor
An automotive company approached us for assistance on a sensor magnet application. Standard magnets can have a "Direction of Magnetisation" axis tolerance of up to +/- 5 degrees from the intended axis. The automotive company was having difficulties in reliably activating their sensor at the correct positions, affecting the performance of their product.
We suggested an improvement to the production process which would offer not only better control of the "Direction of Magnetisation" axis but also 100% test and inspection of the Direction of Magnetisation axis to provide the automotive company with sensor magnets which would be more reliable for their application.
When a magnet is first pressed, it is often pressed slightly oversize then it must then be sintered to fuse the magnet powder together and to also give the magnet its final magnetic characteristics. The shrinkage is actually uneven (due to production methods e.g. magnet shape, pressing, sintering in a vacuum, position in vacuum furnace, etc) which can warp the magnet shape and skew the Direction of Magnetisation. The magnet is then machined to finished dimensions – depending on the warping of the magnets, this is the reason why the "Direction of Magnetisation" can be different from the intended axis.
Our solution was to produce a much larger block than the required magnet shape, deliberately removing all the outer faces to remove any impurities from sintering and using the material in the centre which had better magnetic characteristics for the required magnet shapes. Each magnet was then 100% tested for "Direction of Magnetisation" (measurements in three axes to give a "Direction of Magnetisation" angle from intended axis).
This production method allows a better control of the "Direction of Magnetisation" variation for magnets used in critical applications such as sensors.
Find out more about Bespoke Magnets or contact us for more details.
"We were delighted with the service provided by Eclipse Magnetics; from the initial site survey through to delivery."
"I cannot begin to tell you how much it has helped our operation, the magnetic filtration unit has been a real problem solver it has surpassed all our expectations. Its cured a 30 year plague!"
"This technology is economical, reliable and efficient. I believe that magnetic filtration technology is the future."
"Magnetic filtration has dramatically cleaned up our fluids and improved the surface finish we can offer. It extracts around 50Kg per day of ferrous waste."
"We chose Eclipse Magnetics to supply our housed grid because they are a respected and well-established brand. They offered us a very competitive price, and the process of ordering and installation was straightforward and reliable."
“We are delighted with the Automag installation; it’s solved all the problems we were having previously with downtime and maintenance costs. The filter means that we are able to use recycled water, which is saving us £1000 per week!”
"Here at Qualflow, we base our business on a philosophy of make the product simple to use, reliable and cost-effective. Eclipse Magnetics’ neodymium magnets offer the strongest magnetic performance, and are nickel plated, making them a cost effective.."
"The Ultralift Plus magnetic lifter from Eclipse Magnetics is the perfect solution for the pick-up and transportation of the ultrasonic calibration blocks in our facility"
"The result is an aesthetically pleasing system, which is effective in trapping metal contaminants and is easy to clean..."