Company Name: ISUZU Motors Co. Ltd
Location: Samutprakarn, Thailand
Eclipse Product Installed: AutoMag Skid AM12S1-8
Process Type: Electrophoretic deposition
Isuzu Motors Co., (Thailand) Ltd specialize in the manufacture of commercial vehicles and pickup trucks. Founded in 1966, the company is based in Samutprakarn, Thailand, with the frame production section of the process taking place at the Phrapradaeng Plant. The electrophoretic deposition process is key in the manufacture of pick-up truck frame production. The process consists of several dip tanks, starting at the pre-treatment tank and ending with the electrophoretic deposition tank. The fabricated pickup truck frames from the fabrication line are then sent to an area to be thoroughly cleaned and receive a final coating using the electrophoretic deposition process.
The first two dip tanks that the pick-up truck frames are introduced to are pre-treatment tanks, each with a volume of 66 cu.m and both positioned on the ground. They are filled with de-greasing liquid, which is a water-like strong alkali solution with a pH of approximately 9. Both tanks are fitted with a barrier filter and a centrifuge filter to remove contamination that has been washed off the pick-up truck frames.
However, the barrier filters and centrifuge filters were ineffective, and very quickly became overwhelmed by the build-up of contamination, causing them to clog up and block. Consequently, the filters could not satisfactorily remove the fine steel contamination from the pre-treatment liquid, resulting in the particles being carried over into the electrophoretic deposition tank. As a result, the pre-treatment tanks had to be emptied and cleaned on a regular basis, causing machine down-time and delays to the production process.
Eclipse Magnetics provided ISUZU Motors Co. Ltd with an AutoMag Skid AM12S1-8, including a pump, sump tank, and secondary return pump. This self-contained magnetic filtration and fluid recovery system is fully automated and maximises collection capacity to produce a rapid return on investment. The automatic nature of the AutoMag skid ensures that there is no production down-time, ensuring a very efficient production process.
In addition, a single FiltraMag 2.5 was installed before the centrifugal filter to ensure that almost 100% of the contamination is removed. The FiltraMag is inspected and cleaned as required; a simple process which takes only a few minutes. It can also be removed and cleaned while the machine is in operation, therefore eliminating downtime.
Currently, one 5 gallon pale of steel contaminant is being removed from the AutoMag Skid AM12S1-8 approximately every 3 weeks. Although steel contamination is present in the pre-treatment tank, the overall quality is much improved; so much so that steel contamination is no longer found in the electrophoretic deposition tank. The level of contamination concentration has significantly improved since the installation of the AutoMag and FiltraMag. Cost savings have been made with regard to extending fluid life, reduction in production down-time, filter costs, and extending the life of machinery.
"We were delighted with the service provided by Eclipse Magnetics; from the initial site survey through to delivery."
"I cannot begin to tell you how much it has helped our operation, the magnetic filtration unit has been a real problem solver it has surpassed all our expectations. Its cured a 30 year plague!"
"This technology is economical, reliable and efficient. I believe that magnetic filtration technology is the future."
"Magnetic filtration has dramatically cleaned up our fluids and improved the surface finish we can offer. It extracts around 50Kg per day of ferrous waste."
"We chose Eclipse Magnetics to supply our housed grid because they are a respected and well-established brand. They offered us a very competitive price, and the process of ordering and installation was straightforward and reliable."
“We are delighted with the Automag installation; it’s solved all the problems we were having previously with downtime and maintenance costs. The filter means that we are able to use recycled water, which is saving us £1000 per week!”
"Here at Qualflow, we base our business on a philosophy of make the product simple to use, reliable and cost-effective. Eclipse Magnetics’ neodymium magnets offer the strongest magnetic performance, and are nickel plated, making them a cost effective.."
"The Ultralift Plus magnetic lifter from Eclipse Magnetics is the perfect solution for the pick-up and transportation of the ultrasonic calibration blocks in our facility"
"The result is an aesthetically pleasing system, which is effective in trapping metal contaminants and is easy to clean..."