What to Consider When Using A Magnetic Lifting And Handling System
When using a magnetic lifting system there are important factors to consider which may affect the lifting performance.
An air gap between the magnetic surface and the load will reduce holding performance. The highest performance is where air gaps are kept to a minimum and the magnetic hold is maximised.
Air gaps are determined by the profile of the load and the surface finish. For example paint, dust, scale or different surface finishing processes can constitute air gaps.
The chart below shows the effect of different size air gaps on different material types
Load Material Type
The material type determines the magnetic hold. Some materials have less magnetic permeability and this will affect the hold. The chart below shows some examples of how the magnetic hold is affected by different material types and the reduction factors to apply.
Stainless steel, brass and aluminium have no magnetic holding capacity so should not be used with these products
To achieve maximum holds recommended minimum material thicknesses must be observed. Using with loads outside of the recommended parameters will significantly reduce the hold integrity. Consult the relevant product manual or contact us if you need more details.
Maximum hold will only be achieved when the lifter has full contact area with the load. If the pull face of the lifter poles does not come into contact with the load, for example due to holes in the load surface, the performance will be reduced pro-rata.
"We were delighted with the service provided by Eclipse Magnetics; from the initial site survey through to delivery."
"I cannot begin to tell you how much it has helped our operation, the magnetic filtration unit has been a real problem solver it has surpassed all our expectations. Its cured a 30 year plague!"
"This technology is economical, reliable and efficient. I believe that magnetic filtration technology is the future."
"Magnetic filtration has dramatically cleaned up our fluids and improved the surface finish we can offer. It extracts around 50Kg per day of ferrous waste."
"We chose Eclipse Magnetics to supply our housed grid because they are a respected and well-established brand. They offered us a very competitive price, and the process of ordering and installation was straightforward and reliable."
“We are delighted with the Automag installation; it’s solved all the problems we were having previously with downtime and maintenance costs. The filter means that we are able to use recycled water, which is saving us £1000 per week!”
"Here at Qualflow, we base our business on a philosophy of make the product simple to use, reliable and cost-effective. Eclipse Magnetics’ neodymium magnets offer the strongest magnetic performance, and are nickel plated, making them a cost effective.."
"The Ultralift Plus magnetic lifter from Eclipse Magnetics is the perfect solution for the pick-up and transportation of the ultrasonic calibration blocks in our facility"
"The result is an aesthetically pleasing system, which is effective in trapping metal contaminants and is easy to clean..."